Greencisco Industrial Co., Ltd.

Modular DC UPS 48V/110V/220V/240Vdc/10A-5000A

Greencisco DC UPS made with IGBT or 6 pulse or 12 pulse thyristor rectifiers, are widely used for power plants,hydropower plants,oil and chemistry,various substations,data center,ect.

Characteristics

Application

Our modular DC ups are widely used for power plants(15MW-60MW)and substations(10KV-500KV),hydropower station,transformer stations,signal transmission,telecommunication and lighting,petroleum industry,chemical industry,metallurgy,machinery,papermaking,coal industry,building materials,textile,brewing industry,ect.

Introduction

The DC ups system is adopted new generation of IGBT or 6 pulse or 12 pulse thyristor technology, which meet the requirements of electric power industry with high reliability and high performance on the basis of equipment development and network operation. With design life>20 years,MTBF>200000hours.

Features

●Wide input voltage range:220VAC/single phase or 304-480VAC,50/60Hz, three phases

●With output voltage: 48VDC/110VDC/220VDC/240VDC; output current: 1-5000A available

●With high adaptability to grid

●Automatic low current equalization,with unequalization<3%

●Advanced soft switch technology with efficiency >90%

●Complying with the IEC and UL international standards

●With 3-level centralized/distributed monitoring system(optional)

●With intelligent battery management system,with real-time monitor function for battery operation state and parameters(optional)

●With communication: RS232,RS485 available

Main Components included           

●With AC input distribution cabinets           

●Rectification: rectifiers and insulation diodes           

●DC output distribution: diode chain, IMS, switching branches and control branches            

●Monitoring system: power control unit and distribution monitoring box (optional)      

●Can be parallel with the others of DC UPS and sharing the output current or meet the funtion of one charger is working, the others are standby.

Specification

DCP series 48VDC/110VDC/220VDC UPS power system

Model
DCP220-220DDCP380-220DDCP380-110D
InputVoltage220VAC±15%380VAC±15%,3phases+4wires
Frequency45-65Hz
Efficiency>95%
Power factor0.93
OutputVoltage110-270VDC110-270VDC92-152VDC
Current(A)0.5-100A1-5000A1-5000A
Power(W)1500-3000220-1100000110-760000
Transfer time3-8s
Stabalization<±0.5%
Ripple<0.2%
Current sharing imbalance for parallel<±3%
ProtectionOvervoltage,undervoltage,overheat,reverse
connection,phase failure,short circuit,overcurrent
Intelligent functions

Output dc voltage and current adjustable,output over voltage/undervoltage adjustable;intelligent battery management,with automatic switch seting for boost and floating charging;Detecting AC input and battery voltage/battery current and battery temperature,automatic adjusting voltage according to battery temperature;Detecting bus and branch insulation status;battery discharge management

OthersRemote processing though RS485;Remote signaling,transmit signal to monitoring system, such as AC input fault,rectifier fault,battery over temperature;Remote DC voltage and current measure;Remote controlling rectifier power on and off,adjusting DC voltage and current
Coolingforced fan
Environment temperature-20℃~+50℃
Storage temperature-40℃~+60℃
Humidity0~95%
Air pressure70-106Kpa
Insulation resistanceTesting:500VDC,input to output>≥10MΩ
Dielectric strength2000Vdc
CommunicationRS232/RS485
Noise<50db
IP classIP20

DC UPSfor 10KV-500KV power substations
Input220VAC±15%380VAC±15%
Frequency50/60Hz
Capacity1-30KVA2.2-1100KVA
DC output24/48/110/220VDC
Output current5/10/15/20/30/40/50/60/80/100/160/200/250/315/400/500A/5000A
Ripple≤0.2%
Current stabalization≤±0.5%
Voltage stabalizaiton≤±0.5%
Current share imbalance≤±5%
Power factor1
Efficiency>95%
Battery Ah10-3000Ah
Size(LxWxH)mm800x700x1800